4. Installation
18
BACK
To leave the selected menu or item (go upwards to previous menu)
19
RCU operation
indication led
Lights up when a button on the remote control is pressed. (This is a visual indicator to check
the operation of the remote control)
4.11 Local Keypad Terminology Overview
What keys can be found on the Local Keypad?
19
20
21
22
23
24
25
Local Keypad
SOURCE
LENS
Image 4-29
Local Keypad Overview
The following table gives an overview of the different functionalities of the keys that can be found on the Local Keypad:
19
Cursor keys
To make menu selections, to perform bare scale adjustments or to zoom/focus when the direct
access is active
20
ENTER
To start up the adjustment mode or to con
fi
rm an adjustment or selection in the adjustment mode
21
BACK
To leave the selected menu or item (go upwards to previous menu)
22
SOURCE
Not used
23
Lens control
Use these buttons to obtain the desired ZOOM, SHIFT and FOCUS
24
STANDBY
Standby button, to start projector when the power switch is switched on and to switch off the
projector without switching off the power switch
Attention : Switching to Standby. When the projector is running and you want to go to
standby, press the standby key for 2 seconds.
25
IR Receiver
IR Receiver
R59770324 SIM 5W 22/12/2011
37
Summary of Contents for SIM 5W
Page 1: ...SIM 5W User guide R59770324 06 22 12 2011 Downloaded From projector manual com Barco Manuals ...
Page 54: ...5 Setup 50 R59770324 SIM 5W 22 12 2011 Downloaded From projector manual com Barco Manuals ...
Page 194: ...Index 190 R59770324 SIM 5W 22 12 2011 Downloaded From projector manual com Barco Manuals ...