7. Advanced
10.Use
↓
or
↑
to enable (ON) or disable (OFF) the Automatic Gain on Video
11.Press
ENTER
A white bullet shows the active setting
Image 7-17
The AGC can be disturbing in case of Macrovision encoded signals, therefore the AGC can be disabled (OFF)
at any time
7.4.2.2
Manual gain control on Video
What can be done ?
Beside the Automatic gain control there is the possibility to manually set the gain of the incoming video signal. When the Automatic
gain control is enabled (ON), the manual setting does not affect the gain, Automatic gain control must therefore be disabled. The
manual gain control must be done on an external pattern with white areas (grey scale bar pattern)
How to set the Manual Gain Control ?
1. Press
MENU
to activate the Tool bar
2. Press
→
to select the
Image
item
3. Press
↓
to Pull down the
Image
menu
4. Use
↑
or
↓
to select
Settings
5. Press
→
to pull down the menu
6. Use
↑
or
↓
to select
Gain Control on Video
7. Press
→
to pull down the menu
8. Use
↓
or
↑
to select
Manual
Image 7-18
9. Press
ENTER
R59770324 SIM 5W 22/12/2011
63
Summary of Contents for SIM 5W
Page 1: ...SIM 5W User guide R59770324 06 22 12 2011 Downloaded From projector manual com Barco Manuals ...
Page 54: ...5 Setup 50 R59770324 SIM 5W 22 12 2011 Downloaded From projector manual com Barco Manuals ...
Page 194: ...Index 190 R59770324 SIM 5W 22 12 2011 Downloaded From projector manual com Barco Manuals ...