7. Advanced
A dialog box is displayed. Press
ENTER
to con
fi
rm
All the points of the higher levels (level 2, ...) are altered by this adjustment. The points that belong to the
same level (level 1) remain in the same position (anchors).
7.9.9.4.4
Alpha planes
Alpha plane speci
fi
cation
An alpha plane is a bitmap
fi
le which will be applied to the image in order to obtain a desired soft edge. The
fi
le must be a
.TIFF
fi
le
and it must have the same resolution as the projector’s native resolution. It may be compressed.
Uploading an alpha plane
fi
le
Alpha planes must be uploaded in the following projector directory (accessible via FTP) :
/D/display/Softedge
The
fi
le must be named as follows :
alpha.tiff
The free storage capacity on the D-drive is about 8 MB. it is needed to store the image
fi
les, geometry
fi
les, factory backup, Alpha
planes and Beta planes. Practically, about
6 MB
will be available for the Alpha + Beta plane.
The alpha plane will only be applied if it has been activated in the
Edit...
menu’s dialog box (see procedure
below)
How to activate an alpha plane ?
1. Press the
MENU
key to activate the Tool bar.
2. Push the cursor key
←
or
→
to highlight
Display setup
3. Push the
↓
key to pull down the menu.
4. Push
↓
or
↑
to select
Soft edge and alpha beta planes
5. Push the
→
key to pull down the menu.
6. Push the cursor key
←
or
→
to highlight
Edit...
Image 7-196
7. Press
ENTER
A dialog box will be displayed.
8. Use the arrows to select the
Alpha planes
check box and press
ENTER
R59770324 SIM 5W 22/12/2011
159
Summary of Contents for SIM 5W
Page 1: ...SIM 5W User guide R59770324 06 22 12 2011 Downloaded From projector manual com Barco Manuals ...
Page 54: ...5 Setup 50 R59770324 SIM 5W 22 12 2011 Downloaded From projector manual com Barco Manuals ...
Page 194: ...Index 190 R59770324 SIM 5W 22 12 2011 Downloaded From projector manual com Barco Manuals ...