Barco PDS, User Manual

Page: 133 / 174

PDS • User’s Guide 119
_K==oÉãçíÉ=`çåíêçä
PDS Command List
map=`çãã~åÇ=iáëí
The table below lists PDS remote commands.
Note
The following commands are for the PDS-902 and PDS-901
units. For a PDS-701 unit, the input parameter range cannot
include inputs 7 or 8.
Table B-3.
PDS Remote Commands
Command Description Page
Ethernet Commands
DHCP
Enable/Disable DHCP mode 123
EMAC
Get MAC Address 123
GATEWAY
Set gateway to be used when DHCP is OFF 124
IP
Set Static IP Address to be used when DHCP is OFF 124
SUBNET
Set subnet mask to be used when DHCP is OFF 124
Input Commands
BLKVID
Puts black into the program input 125
CBLEQ
Set cable equalization 125
EDID
Set Input EDID Resolution 125
EDIDTYPE
Set EDID type 125
FREEZE
Freeze the input on program 126
IADJ
Selects the input path to adjust (preview or program) 126
IADJRST
Reset the input timing parameters to default values for analog. 126
IAR
Adjust Input Aspect Ratio 126
IAUTOACK
Input Source Acquire Mode 127
IAUTOC
Attempts to detect and adjust input video to the active video area 127
IAVAIL
Query only command for input availability 127
IBRT
Input brightness adjust 128
ICDEL
Delete Input Configuration 128
ICNT
Input contrast adjust 128
ICPHO
Input Phase Adjust 128
ICREC
Recalls saved input configuration for selected input 129
ICRST
Reset Input Configuration to default values 129
ICSAV
Saves Input Configuration 129