Barco PDS, User Manual

Page: 51 / 174

PDS • User’s Guide 37
4. Operation
Setup Menu
The following sections provide detailed information about
Input Menu
functions:
fåéìí=cçêã~í
From the
Input Menu
, select the top
Input Format
line to view the “auto-acquired” format
for the selected input, or to change the format. The format is shown in the following form:
Hact x Vact @ Vr Hz

1024x768@59.94
Please note the following important points:
• If you select an input and it does not have a valid signal, “
Invalid Signal”
appears.
• If an input was previously valid and its signal is lost, the “
Invalid Signal”
message
appears.
• When
Auto Acquire
is
ON
(in the
User Preferences Menu
), the input video
format for
non-digital sources
will be detected in the following search order:
~ The saved file as defined in the
File Association Menu
~ The library of saved configurations for the selected input
~ A best guess (to the closest video format in the library)
For
digital sources
, when
Auto Acquire
is
ON
, the search order is:
~ The saved configuration file as defined in the
File Association Menu
~ Your library of saved files
~ A direct measurement of the signal
• If the video format is a “best guess” as determined by the “auto acquire” mode, it
is displayed (only in the
Status Menu
) within asterisks.

*1024x768@60.11*
• If you select an input that has been saved (using the
Save Config
function), the
video format is displayed (only in the
Status Menu
) within brackets.

[1024x768@59.94] This example is a saved “exact match” from the format
table (or library).

[*1024x768@59.90*] This example is a saved “best guess.”
• When
Auto Acquire
is
OFF
, the system attempts to lock to the signal using the
configuration defined in the
File Association Menu
for each input channel. If the
input signal is too different from the saved configuration to be usable, the display
indicates “
Invalid Signal
.”
•
Input Format
•
Adjust On
•
Type
•
Colorspace
•
Auto Acquire
•
Sizing Adjust
•
Contrast
•
Brightness
•
Color Balance
•
Processing
•
About Input Configuration Files
•
Save Config
•
Reset Config
•
Recall Config
•
Delete Config