Introduction
14
The Q/A Check section is the same as described above.
The Configuration section in the main window gives an overview of the
imaging boards and displays attached to the workstation. Moreover, it
allows to setup or change the configuration and perform several actions
to the displays in the configuration.
The Configuration section contains the following items:
•
The number of rectangles in the Configuration section reflects the
number of imaging board heads in the computer.
E.g., if the computer contains one dual-head imaging board, you will
notice two squares in the Configuration section: one for each head.
•
For each display that you wish to control and check with MediCal Pro, a
display icon should appear in the rectangles.
These icons reflect the displays connected to the imaging board heads.
•
In a Dicom Theater application, only one icon per imaging board is
visible, even if the board contains two heads. To activate the head that
is not visible, you have to right-click on the visible icon and select
Toggle Head from the drop-down menu.
Head A is reserved for the flat panel display and Head B is reserved for
the projector.
Summary of Contents for MediCal Pro
