![background image](http://html1.mh-extra.com/html/barco/medical-pro/medical-pro_installation-and-user-manual_3886862023.webp)
First installation
23
10
Run the due tasks
See § Running the due tasks : Running the due tasks
2.2
Installation of the hardware
MediCal Pro can be used on any viewing station that runs on Windows
NT4, Windows 2000 or Windows XP. The viewing station can contain any
number of displays, Barco and non-Barco displays.
It is impossible to describe the installation on all these systems in this
manual, but we can give some important hints and rules to follow during
the installation of the hardware.
Barco flat panel display installation
In case of a DVI connection:
Connect the DVI cable of each display to a different imaging board head
inside the viewing station’s computer.
The leftmost display must be connected to head A, the second leftmost
display to head B, etc.
You do not need to set the addresses of the flat panel displays.
Barco CRT display installation
1 Address setting: Each Barco display you wish to include in the
configuration for Q/A checks must get a different remote address.
It is logical to assign address 1 to the leftmost display, 2 to the second
leftmost display, etc.
Vid1
Vid2
Summary of Contents for MediCal Pro
