Barco MCM-400 HFR, User Manual

Page: 118 / 214

10. Expert operation
10.1.2 Working with Geometry fi les
Description
All geometry related data is stored in Geometry fi les. The device’s memory contains a list of Standard Geometry fi les created for
demo purposes, e.g. to demonstrate the warping capabilities of the projector.
The moment we start adjusting the geometry, a Custom Geometry fi le is created in which all adjustments are stored. The active
geometry fi le can always be adjusted. If it is a Custom Geometry fi le, the changes will overwrite the original values. If it is a Standard
Geometry fi le, the content is copied to a Custom Geometry fi le fi rst and then the data is changed.
It is possible to Upload Custom Geometry fi les from a computer to the projector or to download Custom Geometry fi les from the
projector to a computer if this computer is in the same network as the projector.
The fi le notation in the Geometry fi les menu describes a fi le path.
For example : /Standard/Nodist.xml
Name Description
Standard fi le directory, also the type of fi le: Custom or Standard
Nodist fi le name
xml extension
The Geometry operations that you can perform are as follows.
Overview
• Loading a Geometry fi le
• Renaming a Geometry fi le
• Copying a Geometry fi le
• Deleting a Geometry fi le
114 R5909056 MCM-400 HFR 11/05/2016