Barco MCM-400 HFR User Manual Download

Page: 25 / 214

2. Introduction

2.2

Symbols and fonts

Symbol overview

The following icons are used in the manual :

Caution: provides information on potential hazards.

Warning: provides information on potential hazard that can lead to personal injuries.

Info: general information (about a term).

Note: additional information about the subject.

Tip: useful advice about the subject.

Font overview

•

Buttons and keys are indicated in

bold

•

Menu items are indicated in

italic

•

Step related notes, tips, warnings and cautions are printed in

italic

•

Procedure related notes, tips, warnings and cautions are printed in

bold

between 2 lines preceded by an icon.

R5909056 MCM-400 HFR 11/05/2016

Summary of Contents for MCM-400 HFR























































































































































































































Search results

Summary of Contents for MCM-400 HFR

Reviews:

Related manuals for MCM-400 HFR

Brands by name

Popular brands

Barco MCM-400 HFR, User Manual

Search results

Summary of Contents for MCM-400 HFR

Reviews:

Related manuals for MCM-400 HFR

Brands by name

Popular brands