Barco MCM-400 HFR User Manual Download Page 52

Page: 52 / 214

6. Setup and configuration

6.5.1

Con

guring the MCM-400 HFR for a Private Subnet

Description

To con

gure the MCM-400 HFR for a Private Subnet, the following steps are required:

•

connect the MCM-400 HFR to the network;

•

in the MCM-400 HFR, enter a

xed IP address, Subnet Mask and optionally a Gateway IP address;

•

set the network con

guration of any device that is connected to the same subnet to a

xed IP address within the same subnet

range.

Setting a

xed IP address in the MCM-400 HFR

1. In the OSD, navigate to

Installation

Network Settings...

and press

ENTER

to select.

Image 6-8

2. In the dialog box that appears, navigate to

Use Fixed IP

and press

ENTER

to select.

Image 6-9

The

Fixed IP

settings

elds are enabled.

3. Enter the following parameters:

IP address;

Subnet Mask;

Gateway (optional).

4. Select

Apply settings

A dialog box is displayed, showing the progress of the update.

R5909056 MCM-400 HFR 11/05/2016

Summary of Contents for MCM-400 HFR























































































































































































































Search results

Summary of Contents for MCM-400 HFR

Reviews:

Related manuals for MCM-400 HFR

Brands by name

Popular brands

Barco MCM-400 HFR, User Manual

Search results

Summary of Contents for MCM-400 HFR

Reviews:

Related manuals for MCM-400 HFR

Brands by name

Popular brands