Barco MCM-400 HFR User Manual Download

Page: 145 / 214

10. Expert operation

10.2.9 Moving an anchor point in small steps

Description

Adjust mode

is used to do small Soft Edge adjustments using the arrow keys on the RCU. Each step is only one pixel. The actions

that can be performed in Adjust mode are explained in the

Help

section of the

Soft Edge edit

dialog.

For larger adjustments the

Adjust mode

is not ideal. In this case the use of the

Edit mode

and

Change mode

is more appropriate.

Using the arrow keys to move an anchor point

1. From the

Soft Edge edit

dialog, press

ENTER

BACK

to navigate to

Adjust mode

Image 10-52

2. On the RCU, press

◄

►

multiple times of keep the arrow pressed to move the selected anchor point in the direction of the

X-axis.

3. Press

▲

▼

multiple times or keep the arrow pressed to move the selected anchor point in the direction of the Y-axis.

R5909056 MCM-400 HFR 11/05/2016

141

Summary of Contents for MCM-400 HFR























































































































































































































Search results

Summary of Contents for MCM-400 HFR

Reviews:

Related manuals for MCM-400 HFR

Brands by name

Popular brands

Barco MCM-400 HFR, User Manual

Search results

Summary of Contents for MCM-400 HFR

Reviews:

Related manuals for MCM-400 HFR

Brands by name

Popular brands