Barco DP2K-17BLP, User And Installation Manual

Page: 93 / 185

8. Input & communication
General settings
Advanced settings
Source Port Port type Mode Scan type Color
space Pixel mapping Calibration
3G - Level B - Quad
Link
3G - Level A - Quad
Link Progressive SF - 2nd
fi eld dominant
XYZ/RGB
3G - Level B - Quad
Link
Single
Progressive YCbCr HD-SDI - Quad Link Single
Progressive SF - 1st
fi eld dominant
YCbCr HD-SDI - Quad Link Single
HD-SDI - 4K 4:2:2 10
bits/color
Progressive SF - 2nd
fi eld dominant
YCbCr HD-SDI - Quad Link Single
8.6 Integrated Media Block/Server (optional)
Depending on the projector con fi guration the projector card cage is either equipped with an ICP or ICMP. In
case an ICP is installed then an IMB, IMS, or HDSDI input module can be optionally inserted into the slot below
the ICP. This is not the case if the ICMP is installed. For more information about the ICMP see chapter called
ICMP.
Integrated Media Block (IMB)
Image 8-7
Example of IMB powered by Doremi.
Integrated Media Server (IMS)
Image 8-8
Example of IMS powered by Doremi.
Con fi guration and operation instructions for IMB and IMS are not included in this document. See manufactur-
ers website of the installed IMB/IMS for technical documentation and support.
1. Only for Quad input board (this is a split screen setting, when selected, it turns on split-screen)
R5906753 DPXK BLP SERIES 20/11/2017 89