Barco DP2K-17BLP, User And Installation Manual

Page: 61 / 185

6. Physical installation stand alone cooler
Note: The two U-Brackets are not fi xed in same manner. Here, the concerned U-bracket, is situated in the lower left corner of
the housing when you look at the device on the side of the cooler inputs.
Image 6-13
3. Fixate the second U-bracket to the frame with only one screws (M5x8) as shown in the following drawing. There is a space of
more or less 2 centimeters between the frame side and the bracket.
Note: The two U-Brackets are not
fi xed in same manner. Here, the concerned U-bracket, is situated in the lower right corner of
the housing when you look at the device on the side of the cooler inputs.
+/- 2cm
Image 6-14
4. Fixate the bracket situated to the backside of the cooler housing with only one screws (M5x8) each.
R5906753 DPXK BLP SERIES 20/11/2017 57