Barco DP2K-17BLP, User And Installation Manual

Page: 86 / 185

8. Input & communication
8.4 HD-SDI Input Module (optional)
Depending on the projector con fi guration the projector card cage is either equipped with an ICP or ICMP. In
case an ICP is installed then an IMB, IMS, or HDSDI input module can be optionally inserted into the slot below
the ICP. This is not the case if the ICMP is installed. For more information about the ICMP see chapter called
ICMP.
Location of the source input ports
SMPTE 292/424 IN
A B
SEL
SYNC OK
SEL
SYNC OK
1 2
Image 8-4
1
SMPTE 292/424 input, port A (maximum cable length of 30 m allowed)
2 SMPTE 292/424 input, port B (maximum cable length of 30 m allowed)
SMPTE
Society of Motion Picture and Television Engineers - A global organization, based in the United States, that sets stan-
dards for baseband visual communications. This includes
fi lm as well as video standards.
HD-SDI settings
Source: 2K
General settings Advanced settings
Port Port type Mode Scan type Color
space Pixel mapping Calibration
Progressive
Progressive - fi eld bit
normal
Progressive - fi eld bit
inverted
Progressive SF - 2nd
fi eld dominant
HDSDI Single link 4:2:2 10
bits/color
Progressive SF - 1st
fi eld dominant
YCbCr HDSDI-Single link Single
3G-level A-Single link 4:2:2 12
bits/color Progressive YCbCr
3G-level B-Dual link
3G-level A-Single link 4:4:4 10
bits/color Progressive RGB
3G-level B-Dual link
3G-level A-Single link
A or B
3GSDI link
4:4:4 12
bits/color Progressive XYZ/RGB
3G-level B-Dual link
Single
82 R5906753 DPXK BLP SERIES 20/11/2017