ETOE D2 Firmware Upgrade Download

Page: 1 / 3

Firmware Upgrade

Firmware Upgrade

To achieve the peak performance of your ETOE projector, it is highly
recommended to keep its firmware up to date all the time.

Check the Necessity of Firmware Upgrade

1. Turn on the projector and go to HomePage>Settings>About;

2. Check the version number on “System Version”;

3. The newest firmware version begins with V2.07.09;

4. If the version is not the same as the newest one, it is recommended to update to the

newest one.

How to upgrade firmware?

1. Please download the firmware and

unzip

it. You will get a software named

"MstarUpgrade". Please contact the tech support online address on the product
pacakge for the firmware file.

2. Copy "MstarUpgrade" to the root file of your USB flash drive.

Note

Do not change the firmware’s file name. If the file name is changed, the firmware
update will not start.

Plug

the USB flash drive into the USB port of the projector.

Summary of Contents for D2

Page 2: ...rom the projector and check that all of the indicators on the projector are off 4 Plug in the power cord of the projector 5 Press and hold the power button on top of the projector until the upgrade progress bar with blue background appear on the screen step 3 step 5 step 5 ...

Page 3: ... firmware is updating If the power is disconnected the projector may not start correctly 7 Check the result of the update a Click on the menu of the projector with the remote b Click on Setting and then choose About c Make sure that the number that shown on System Version has been upgraded to the newest version Copyright ETOE Product Model A1171 Step 7 a Step 7 b ...