B&R Panel PC 3100, User Manual

Page: 165 / 277

Software
Automation PC 3100 User's manual V 1.00
Translation of the original documentation
165
BIOS parameter Setting options Description
Custom number
Default
PCH PCIe CLKREQ# mapping override
No CLKREQ
Disables the clock request number for standard platform mapping or uses the default
values or manual value
CLKREQ number INT
Default: 0
Defines the CLKREQ number
Range: 0 to 15
Table 191: Advanced - PCH-IO configuration - PCI Express root port n
1) PCI Express root port n must be enabled in order to make further configurations.
2) Upstream port transmitter preset
The default value is system-optimized by B&R.
3) Downstream port transmitter preset
The default value is system-optimized by B&R.
4) Changes to the ACS have no effect on the display of the following indented parameters.
5) With a multifunction device, all functions within the device are monitored.
For the root port, the error occurs within the root complex.
6) Generates a system error if an error of this category is reported by a root port or device on a root port.
4.1.7.2.9.2 SATA and RST configuration
BIOS parameter Setting options Description
Disabled SATA controller(s)
1)
Enabled
Disables/Enables the SATA controller
AHCI
SATA mode selection
Intel RST premium
with Intel Optane
Select SATA mode AHCI (not RAID) or Optane (or RAID)
See "RAID configuration" on page 180 .
Disabled SATA test mode
Enabled
Disables/Enables the test function
This is only used for control measurements.
Alternate RAID device ID
Client
Selects the RAID device ID mode
Software feature mask configuration
2)
Enter Opens submenu "Software feature mask configuration" on page 165
Disabled Aggressive LPM support
Enabled
Disables/Enables Aggressive Link Power Management
The host controller can change to a low-power state in the idle phase of the SATA device.
Serial ATA port n - Displays the name and capacity of the SATA device
Software preserve - Displays support for the software preserve
Disabled Port
n
Enabled
Disables/Enables SATA port
n
Disabled Hot plug
Enabled
Disables/Enables hot plugging
Configured as eSATA - Displays hot plugging support of the device on the SATA port
Disabled Spin up device
Enabled
Disables/Enables spin up for the connected device on the SATA port
Hard disk drive SATA device type
Solid-state drive
Defines the SATA device type as HDD or SSD
Unknown
ISATA
Direct connect
Default for port 0 and 1
Flex
Topology
M2
Default for port 2
Defines the SATA topology
Disabled
SATA port
n
DevSlp
Enabled
Disables/Enables for the device on port
n
Disabled DITO configuration
Enabled
Disables/Enables device sleep idle timeout
DITO value INT
Default:
625
Defines the DITO value [ms]
Range: 0 to 1023
DM value INT
Default: 15
Defines the DITO multiplier
Range: 0 to 15
Table 192: Advanced - PCH-IO configuration - SATA and RST configuration
1) SATA controller(s) must be enabled to be able to make additional configurations.
2) This submenu can only be configured if "SATA test mode" is enabled.
3) n corresponds to the available SATA ports that are indexed from 0 to n -1.
Software feature mask configuration
BIOS parameter Setting options Description
Disabled HDD unlock
Enabled
Disables/Enables HDD unlock
The HDD can be locked in the operating system by a password.
Disabled LED locate
Enabled
Disables/Enables LED locate
Indicates that LED/SGPIO hardware is connected and pingable.
Disabled Use RST legacy OROM
Enabled
Disables/Enables rapid storage technology legacy option ROM for active CSM
1)
Table 193: Advanced - PCH-IO configuration - SATA and RST configuration - Software feature mask configuration
StockCheck.com