B&R Panel PC 3100 User Manual Download Page 35

Page: 35 / 277

Technical data

Automation PC 3100 User's manual V 1.00

Translation of the original documentation

2.2.5 Product information

Each B&R device is assigned a device number with a unique serial number and barcode (type 128) to enable

unique identification of the device. The product information includes additional data such as product family, power

data, certifications, safety notices, license adhesive labels and a field for customer information.

Automation PC 3100

Input: 24 VDC / 1 .. 5.5 A

Fuse: 65 VDC / 15 A

5SXXXXXXXXXXXX-xxx

ED150168421

Made in Austria

ETH1: 00-E0-48-40-9F-87

ETH2: 00-E0-48-40-9F-88

B&R I 5142 Eggelsberg I AUSTRIA

ETH3: 00-E0-48-40-9F-87

ETH4: 00-E0-48-40-9F-88

Lizenz-

sticker

XXXXXXXXXXXX

Use only non-incendive USB

devices as described in the

user manual. Surrounding air

temp.: see user manual

Type 4X indoor use only

XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

This device complies with part 15 of

the FCC Rules. Operation is subject

to the following two conditions: (1)

This device may not cause harmful

interference, and (2) this device must

accept any interference received,

including interference that may cause

undesired operation.

Do not remove or insert CFast device

or open housing while power is on!

(1)

(3)

(2)

(4)

(5)

(6)

No.

Label

Explanation

Company logo, product family, power data

Contains the name of the product family, company logo and information about the power data

of the device.

Identification

Contains the device number with unique serial number and barcode of the device, country of

production, company address and MAC addresses of the installed Ethernet interfaces.

The number of MAC addresses may vary depending on the configuration.

Certifications

Contains all standards and certifications valid for the complete system.

These may vary depending on the device configuration.

Safety notices

Contains safety notices for the complete system.

These may vary depending on the device configuration.

License adhesive label

The license adhesive label for operating systems depends on the selected operating system and

is not available for all configurations.

Customer information

Space for possible customer information. This must be defined already during device configura-

tion. Subsequently changing or adding this customer information is not possible.

Table 20: Product information

All components installed in the system (serial number, material number, revision, delivery date and end

of warranty) are indicated in the device number. This information can be retrieved from the B&R website

(

www.br-automation.com

) with the device serial number. After the search, a detailed list of the installed compo-

nents is displayed.

The device number is shown here.

The serial number of the device is shown here.

5SXXXXXXXXXXXX-xxx

ED150168421

Made in Austria

ETH1: 00-E0-48-40-9F-87

ETH2: 00-E0-48-40-9F-88

B&R I 5142 Eggelsberg I AUSTRIA

ETH3: 00-E0-48-40-9F-87

ETH4: 00-E0-48-40-9F-88

(1)

(2)

Table 21: Identification

StockCheck.com

Summary of Contents for Panel PC 3100






















































































































































































































































































Search results

Summary of Contents for Panel PC 3100

Reviews:

B&R Panel PC 3100, User Manual, Page: 35 / 277

Search results

Summary of Contents for Panel PC 3100

Reviews: