B&R Panel PC 3100 User Manual Download Page 195

Page: 195 / 277

Software

Automation PC 3100 User's manual V 1.00

Translation of the original documentation

195

4.5.6 Technology Guarding

Technology Guarding is the license protection used for individual software components. The "Technology

Guard" (dongle) serves as the license container; this is connected to an available USB interface on the target

system.
The B&R software components Automation Runtime Embedded (ARemb), Automation Runtime Windows (ARwin)

and Automation Runtime Embedded Terminal require a license, and the use of the Technology Guard is mandatory.

Information:

Licensing using the Technology Guarding wizard is available starting with Automation Studio version

4.1 and Automation Runtime version 4.08. A Technology Guard is not necessary in earlier Automation

Runtime versions.

For additional information about Technology Guarding, see Automation Help.

StockCheck.com

Summary of Contents for Panel PC 3100






















































































































































































































































































Search results

Summary of Contents for Panel PC 3100

Reviews:

Related manuals for Panel PC 3100

Brands by name

Popular brands

B&R Panel PC 3100, User Manual

Search results

Summary of Contents for Panel PC 3100

Reviews:

Related manuals for Panel PC 3100

Brands by name

Popular brands