Accessories
Automation PC 3100 User's manual V 1.00
Translation of the original documentation
219
6.2 Terminal block ready relay
6.2.1 0TB2104.8000
6.2.1.1 General information
This 1-row, 4-pin TB2104 terminal block is used for ready relay 5AC901.IRDY-00.
6.2.1.2 Order data
Model number
Short description
Figure
Terminal blocks
0TB2104.8000
Connector 24 VDC - 4-pin female - Screw clamp terminal block
2.5 mm²
Table 227: 0TB2104.8000 - Order data
6.2.1.3 Technical data
Information:
The following specified characteristic data, features and limit values are only valid for this accessory
and may differ from those of the complete system. The data specified for the complete system applies
to the complete system in which this accessory is installed, for example.
Model number
0TB2104.8000
General information
Certifications
CE
Yes
UL
cULus E115267
Industrial control equipment
Terminal block
Note
Nominal data per UL
Number of pins
4 (female)
Type of terminal block
Screw clamp terminal block variant
Cable type
Only copper wires (no aluminum wires!)
Spacing
5.08 mm
Connection cross section
AWG wire
26 to 14 AWG
Wire end sleeves with plastic covering
0.2 to 1.5 mm²
Solid wires
0.2 to 2.5 mm²
Fine strand wires
0.2 to 1.5 mm²
With wire end sleeves
0.2 to 1.5 mm²
Electrical characteristics
Nominal voltage
300 V
Nominal current
1)
10 A
Operating conditions
Pollution degree per EN 61131-2
Pollution degree 2
Table 228: 0TB2104.8000 - Technical data
1)
The respective limit data of the IF option must be taken into account!
StockCheck.com
