B&R Panel PC 3100 User Manual Download Page 193

Page: 193 / 277

Software

Automation PC 3100 User's manual V 1.00

Translation of the original documentation

193

4.5 Automation Runtime

4.5.1 General information

The Automation Runtime real-time operating system is an integral part of Automation Studio. This real-time oper-

ating system makes up the software kernel that allows applications to run on a target system.

•

Guarantees the highest possible performance for the hardware used

•

Runs on all B&R target systems

•

Makes the application hardware-independent

•

Easy portability of applications between B&R target systems

•

Guaranteed determinism through cyclic system

•

Configurable jitter tolerance in all task classes

•

Support for all relevant programming languages, such as IEC 61131-3 languages and C

•

Rich function library per IEC 61131-3 and additionally the extended B&R Automation Library

•

Integrated in Automation NET. Access to all networks and bus systems via function calls or by configuration

in Automation Studio™

B&R Automation Runtime is fully embedded in the corresponding target system (hardware on which Automation

Runtime is installed). It thus enables application programs to access I/O systems (also via the fieldbus) and other

devices such as interfaces and networks.

4.5.2 Order data

Model number

Short description

Figure

Technology Guard

0TG1000.01

Technology Guard (MSD)

0TG1000.02

Technology Guard (HID)

1TG4600.10-5

Automation Runtime Windows TG license

1TG4601.06-5

Automation Runtime Embedded TG license

Table 218: 0TG1000.01, 0TG1000.02, 1TG4600.10-5, 1TG4601.06-5 - Order data

4.5.3 Automation Runtime Windows (ARwin)

System requirements

The following software versions (or higher) are required to operate Automation Runtime Windows on an Automation

PC 3100:

•

ARwin Upgrade uR E4.34

•

Automation Studio V4.3.4

•

Technology Guard

Information:

In order to use Automation Runtime Windows (ARwin), BIOS setting

Advanced - OEM features - Real-

time environment

must be set to

Enabled

4.5.4 Automation Runtime Embedded (ARemb)

System requirements

The following software versions (or higher) are required to operate Automation Runtime Embedded on an Automa-

tion PC 3100:

•

ARemb upgrade AR E4.34

•

Automation Studio V4.3.4

•

Visual Components Runtime (VC) V4.34

•

Technology Guard

StockCheck.com

Summary of Contents for Panel PC 3100






















































































































































































































































































Search results

Summary of Contents for Panel PC 3100

Reviews:

Related manuals for Panel PC 3100

Brands by name

Popular brands

B&R Panel PC 3100, User Manual

Search results

Summary of Contents for Panel PC 3100

Reviews:

Related manuals for Panel PC 3100

Brands by name

Popular brands