B&R Panel PC 3100 User Manual Download Page 208

Page: 208 / 277

Standards and certifications

208

Automation PC 3100 User's manual V 1.00

Translation of the original documentation

5.2 Certifications

Danger!

A complete system can only receive certification if ALL individual components installed and connected

in it have the corresponding certifications. If an individual component is used that does NOT have the

corresponding certification, the complete system will also NOT be certified.

B&R products and services comply with applicable standards. These are international standards from organizations

such as ISO, IEC and CENELEC, as well as national standards from organizations such as UL, CSA, FCC, VDE,

ÖVE, etc. We pay special attention to the reliability of our products in the industrial sector.

Information:

The certifications valid for the respective product are available on the website and in the user's manual

under the technical data in section "Certifications" or in the associated certificates.

5.2.1 UL certification

Ind. Cont. Eq.

E115267

Products with this mark are tested by Underwriters Laboratories and listed as "indus-

trial control equipment". The mark is valid for the USA and Canada and facilitates the

certification of your machines and systems in this economic area.

Underwriters Laboratories (UL) per standards UL 61010-1 and UL 61010-2-201

Canadian (CSA) standard per C22.2 No. 61010-1-12 and CSA C22.2 No.

61010-2-201:14

The UL certificates are available on the B&R website under

Downloads - Certificates

- UL

It is important to note that the device is classified as "open type" when used in the area of "Industrial control

equipment" per UL61010-1/UL61010-2-201. The device must therefore be installed in an appropriate protective

housing as a requirement for certification or operation per UL61010-1/UL61010-2-201.

5.2.2 EAC

Products with this mark are tested by an accredited test laboratory and permitted to

be imported into the Eurasian Customs Union (based on EU conformity).

5.2.3 KC

Products with this mark are tested by an accredited test laboratory and permitted to

be introduced into the Korean market (based on EU conformity).

StockCheck.com

Summary of Contents for Panel PC 3100






















































































































































































































































































Search results

Summary of Contents for Panel PC 3100

Reviews:

Related manuals for Panel PC 3100

Brands by name

Popular brands

B&R Panel PC 3100, User Manual

Search results

Summary of Contents for Panel PC 3100

Reviews:

Related manuals for Panel PC 3100

Brands by name

Popular brands