Baldor VS1SM, Installation & Operating Manual

Page: 61 / 71

MN761 Technical Specifications A-1
Appendix A
Technical Specifications
All specifications are subject to change without notice.
Input Ratings
Voltage 230
Voltage range 190-253
Phase Single Phase
Frequency 50/60Hz
±
5%
Impedance 1% minimum from mains connection
Output Ratings
Horsepower 0.5-3 HP @ 230VAC
Overload Capacity 150% for 1 minute
Frequency 0-400Hz
Voltage 0 to maximum input voltage (RMS)
Protective Features
Trip Over Voltage, Low Voltage, Over Current, Ground
Fault, Inverter Overheat, Motor Overheat, Output
Phase Open, Overload Protection, External Faults,
Communication Error, Loss of Speed Command,
Hardware Fault, Option Fault.
Stall Prevention Over voltage suppression, over current suppression
External Output LED trip condition indicators, 5 assignable logic
outputs, 2 assignable analog outputs
Short Circuit Phase to phase, phase to ground
Electronic Motor Overload
Meets UL508C (
I
2
T)
Environmental
Conditions
Temperature -10 to 40
°
C Derate 3% per degree C above 40 to
50
°
C maximum ambient temperature
Cooling Forced air
Enclosure IP20, NEMA 1 (optional)
Altitude Sea level to 3300 Feet (1000 Meters)
Derate 2% per 1000 Feet (303 Meters) above 3300
Feet
Humidity 10 to 90% RH Non‐Condensing
Shock 1G
Vibration 0.5G at 10Hz to 60Hz
Storage Temperature ‐20 to +65
°
C
Duty Cycle 1.0