Baldor VS1SM, Installation & Operating Manual

Page: 17 / 71

MN761 Control Wiring 5-1
Chapter 5
Control Wiring
5.1 Control Wiring Overview
Analog and digital inputs and output terminals are shown in Figure 5‐1 and described in Table 5‐1.
Figure 5‐1 Control Wiring Terminal Identification
Control I/O Terminal Strip
P4 P5 VR V1 CM I AM
30A 30B 30C MO EXTGP24 P1 P2 CM P3
Tightening Torque =
3.5 lb-in (0.4Nm)
See Table 4‐1 for
Tightening Torques
NPN
PNP
Table 5‐1 I/O Connection Description
Connector
Terminal
Signal Description
P1 Forward Run
P2 Reverse Run
P3 Output Inhibit
P4 Fault Reset
P5 Jog Operation
P24 Internal 24VDC power (powers P1-P5 inputs)
VR 12V power supply for speed reference potentiometer
V1 0-10VDC Analog Input Terminal
I
0-20mA Analog Input Terminal
CM Internal 24V common (return for P1-P5 and AM inputs)
AM 0-10VDC Analog Output Terminal
CM Common for Analog Output
MO Digital Output (Open Collector)
EXTG Digital Common for MO
30A Relay Output - A Contact
30B Relay Output - B Contact
30C Common - 30A, 30B Contacts