Baldor VS1SM, Installation & Operating Manual

Page: 12 / 71

3-2 Installing the Drive MN761
3.3.2 Watts Loss Data
Refer to Table 2‐1 for watts loss data.
3.3 Cover Removal
To connect power and signal wires, the cover must be removed.
Remove the cover as shown in Figure 3‐2.
1.
Gently press in the area labeled Cover Release shown in Figure 3‐2.
2. Slide the cover downward about 3/8 in (10mm) and lift off the Main Cover.
3. The Power Terminal Cover can then be removed by lifting it from the control.
Figure 3‐2 Cover Removal
Cover
Release
Main
Cover
Power
Terminal
Cover
Lift Cover
Slide
Cover
Power &
Motor
Ground
Size B
Size A
Figure 3‐3 Mounting Hole Locations
B1
B2
B
A1
A
C
Table 3‐2 Drive Dimensions and Weights
Size
Catalog
Number
Dimensions inches(mm)
Weight
Outside Mounting
Height (A) Width (B) Depth (C) Height (A1) Width (B1) Width (B2) lb (kg)
A VS1SM80P5 5.63 (143) 3.11 (79) 5.64 (143) 2.66 (67.5) 5.35(135.9) N/A 1.92 (0.87)
A VS1SM80P5- F 5.63 (143) 3.11 (79) 5.64 (143) 2.66 (67.5) 5.35(135.9) N/A 2.09(0.95)
A VS1SM81 5.63 (143) 3.11 (79) 5.64 (143) 2.66 (67.5) 5.35(135.9) N/A 1.96 (0.89)
A VS1SM81-F 5.63 (143) 3.11 (79) 5.64 (143) 2.66 (67.5) 5.35(135.9) N/A 2.14(0.97)
B VS1SM82 5.63 (143) 6.14 (156) 5.64 (143) 5.34 (135) 5.43 (138) 2.71 (68.8) 3.95 (1.79)
B VS1SM82-F 5.63 (143) 6.14 (156) 5.64 (143) 5.34 (135) 5.43 (138) 2.71 (68.8) 4.28(1.94)
B VS1SM83 5.63 (143) 6.14 (156) 5.64 (143) 5.34 (135) 5.43 (138) 2.71 (68.8) 4.08 (1.85)
B VS1SM83-F 5.63 (143) 6.14 (156) 5.64 (143) 5.34 (135) 5.43 (138) 2.71 (68.8) 4.41(2.0)