Baldor VS1SM, Installation & Operating Manual

Page: 23 / 71

MN761 Using the Keypad 6-3
View the Drive Group Parameters : When power is applied, the first Drive Group parameter is viewed.
Action Description Display Comments
Apply Power Power on display shows
drive status. Speed
Reference is 0.0Hz This is the first display
within the Drive Group
Press the
Y
key The next parameter is
displayed. Acceleration time. Press
enter to view or change
setting.
Press the
Y
key
The next parameter is
displayed. Deceleration time. Press
enter to view or change
setting.
Press the
Y
key
The next parameter is
displayed. Start/Stop Source. Press
enter to view or change
setting.
Press the
Y
key The next parameter is
displayed. Speed Reference Source.
Press enter to view or
change setting.
Press the
Y
key The next parameter is
displayed. Preset Speed 1. Press
enter to view or change
setting.
Press the
Y
key The next parameter is
displayed. Preset Speed 2. Press
enter to view or change
setting.
Press either the
A
or the
"
key returns to the first
parameter in the group.
Return to top level of
present group. Pressing either key will
immediately return to the
first parameter in the
group.
Press the
"
key to go to
the next parameter group.
The first parameter in the
Function Group 1
Press the
"
key to go to
the next parameter group.
The first parameter in the
Function Group 2
Press the
"
key to go to
the next parameter group.
The first parameter in the
I/O Group
Press the
"
key returns
to the drive group.