Baldor VS1SM, Installation & Operating Manual

Page: 27 / 71

MN761 Using the Keypad 6-7
Reset all parameters to factory settings : Restoring factory settings (H93) will overwrite all
parameter values.
Action Description Display Comments
Apply Power
Press the
"
key to go to
Function Group 2.
The jump code in
Function Group 2
Press Enter to edit the
jump code. Change the code from 1
to 93.
Press the
Y
key 2 times
to increment to 3.
Press the
A
key to move
1 digits to the left
Press the
Y
key 9 times
to increment to 9.
Jump code is now 93.
Press Enter to view to
F93.
Press Enter to jump to
H93
Press Enter to edit to
change the setting
Press the
Y
key to
change value to 1 (reset
all parameter values).
Press Enter to restore all
factory settings.
Press Enter to rest
values. The display will
flash for a few seconds
until the values are reset
to factory settings.