Baker Hughes Panametrics Sentinel LCT8, User Manual

Page: 44 / 138

3.4.2.1 Fluid type/tracking configuration
It is critical to select the appropriate fluid type/tracking
option for the application. Tracking refers to tracking
windows , which is used to detect the receive signal when
you are unsure of the fluid sound speed, or when the fluid
sound speed changes drastically under process conditions.
To program the fluid type/tracking options, refer to Figure 46
on page 33 and complete the steps on the next page.
NOTE: If necessary, refer to Table 4 on page 23 as a
reminder about color code meanings.
1. Refer to Primary pages on page 26 and navigate to
page 3: program .
2. Use the [

] and [

] keys to highlight composite in the
list of channels, and press the [

] key twice to confirm
your choice.
3. Use the [

] and [

] keys to highlight the fluid option.
Then, press the [

] key to confirm your selection or press
the [

] key to return to the previous screen.
4. At the next screen, fluid type is the only option and
is already highlighted. Press the [

] key to confirm
this selection or press the [

] key to return to the
previous screen.
IMPORTANT
Consult the factory before choosing either the normal fluid
type or preprogrammed tracking options.
5. Use the [

] and [

] keys to highlight tracking. Then, press
the [

] key twice to confirm your selection or press the
[

] key to return to the previous screen.
6. Use the [

] and [

] keys to highlight either
preprogrammed or other , then, press the [

] key twice
to confirm your selection or press the [

] key to return to
the previous screen.
a. If
preprogrammed was selected, use the [

] and [

]
keys to highlight the desired option. Press the [

] key
twice to confirm your selection or press the [

] key to
cancel. You will return to the previous screen.
b. If other was selected, use the [

] and [

] keys to
highlight the Soundspeed min option. Press the [

]
key to confirm your selection. Enter the desired value
and press the [

] key to confirm your entry or press
the [

] key to cancel the change. When, you return to
the previous screen, repeat the process to enter the
Soundspeed max value.
34