Baker Hughes Panametrics Sentinel LCT8, User Manual

Page: 62 / 138

3.5.5 Setting the date and time
To set the date/time , refer to Figure 59 below and proceed
as follows:
NOTE: If necessary, refer to Table 4 on page 23 as a
reminder about color code meanings.
1. Refer to Primary pages on page 26 and navigate to
page 4: configuration (generic) .
2. Use the [

] and [

] keys to highlight date/time and press
the [

] key to confirm your choice.
3. When the screen with the current date/time opens, press
the [

] key to edit the setting or press the [

] key to
cancel and return to the previous screen.
4. If you chose to edit the setting, use the [

] and [

] keys
to highlight the desired character. Then, use the [

] and
[

] keys to increment or decrement the value for that
character. Repeat this process until all characters of the
date/time have been set as desired. Then, press the [

]
key to confirm the new setting or press the [

] key to
cancel and return to the previous screen.
Figure 59: Setting the date and time
Legend
Red At least user 1 level access required to follow the step.
Red Option only visible to user 1 or above.
Green Option only visible to user 3 or above.
Use

or

arrow keys to position
the cursor.
Use

or

arrow keys to
increment or decrement the digits
to set the desired “date and time.”
52