Baker Hughes Panametrics Sentinel LCT8, User Manual

Page: 58 / 138

To select the units for the volumetric and totalizer output registers, refer to Figure 56 below and complete the steps on the
next page.
NOTE: If necessary, refer to Table 4 on page 23 as a reminder about color code meanings.
Figure 56: Units selection for volumetric and totalizer output registers
Legend
Green At least user 3 level access required to follow the step.
Red At least user 1 access required to follow the step.
Red Option only visible to user 1 or above.
Green Option only visible to user 3 or above.
Use

arrow to
highlight the
preferred”option
and press 
twice to confirm
selection.
Use

arrow to highlight
“modbus” if not already highlighted.
48