4.1.3.3 Post update recommendations
To ensure that the
Sentinel LCT8
operates correctly,
Panametrics recommends defaulting the meter after
software updates.
CAUTION!
All site configuration and calibration data
will be lost when the meter is defaulted!
It is
highly recommended that a site file archive
is captured via PanaView SEN898 or using the
site file menu
under the
factory menu
. This
archive can then be used to restore the site
and calibration data after the meter default
is complete (see
Save, restore or delete a site
).
NOTE:
After the
Sentinel LCT8
has been defaulted, it restarts
in the locked mode. See
Unlocking the meter on page 25
for instructions on unlocking the meter.
To default the meter, use either of the two following methods:
Method 1: Using the factory menu
Refer to
Figure 87
below and complete the step-by-step
instructions after the figure.
NOTE:
If necessary, refer to
as a
reminder about color code meanings.
1. Refer to
and navigate to
page 9: factory
.
2. Use the [
] and [
] keys to highlight default meter and
press the [
] key to confirm your choice.
3. Use the [
] and [
] keys to highlight
yes
or
no
and press
the [
] key twice to confirm your selection or press the
[
] key to cancel and return to the previous screen.
4. If you selected and confirmed
yes
, verify that the meter
restarts.
Figure 87: Defaulting the meter from the factory menu
Use
or
arrow to highlight the
preferred option and press
twice to confirm selection.
NOTE:
Do not use default meter, upgrade
or site file options before consulting
Panametrics factory
Legend
Red
At least user 1 level access required to follow the step.
Red
Option only visible to user 1 or above.
Yellow
Option only visible to user admin access.
Yellow
At least user admin level access required to follow this step
Green
Option only available to user 3 or above
Green
At least user 3 level access required to follow the step.
83
Summary of Contents for Panametrics Sentinel LCT8
