Baker Hughes Panametrics Sentinel LCT8, User Manual

Page: 57 / 138

1. Refer to Primary pages on page 26 and navigate to
page 4: configuration (generic) .
2. Use the [

] and [

] keys to highlight communication and
press the [

] key to confirm your choice.
3. At the next screen, use the [

] and [

] keys to highlight
the modbus option. Then, press the [

] key to confirm
your selection or press the [

] key to cancel and return
to the previous screen.
4. Set the various parameters as follows:
a. Use the [

] and [

] keys to highlight the address
option and press the [

] key to confirm your selection.
Then, enter the desired value and press the [

] key to
confirm the new value or press the [

] key to cancel
the change and return to the previous screen.
b. Use the [

] and [

] keys to highlight the interface
option and press the [

] key to confirm your selection.
Then, select the desired option from the list and press
the [

] key twice to confirm the selection or press
the [

] key to cancel the change and return to the
previous screen.
c. Use the [

] and [

] keys to highlight the word order
option and press the [

] key to confirm your selection.
Then, select the desired option from the list and press
the [

] key twice to confirm the selection or press
the [

] key to cancel the change and return to the
previous screen.
d. Use the [

] and [

] keys to highlight the baud rate
option and press the [

] key to confirm your selection.
Then, select the desired option from the list and press
the [

] key twice to confirm the selection or press
the [

] key to cancel the change and return to the
previous screen.
e. Use the [

] and [

] keys to highlight the parity option
and press the [

] key to confirm your selection. Then,
select the desired option from the list and press the
[

] key twice to confirm the selection or press the [

]
key to cancel the change and return to the previous
screen.
f. Use the [

] and [

] keys to highlight the stop bits
option and press the [

] key to confirm your selection.
Then, select the desired option from the list and press
the [

] key twice to confirm the selection or press
the [

] key to cancel the change and return to the
previous screen.
NOTE: Additional options after stop bits are not visible at the
user-1 and user-2 access levels.
47