Baker Hughes Panametrics Sentinel LCT8, User Manual

Page: 84 / 138

1. Refer to Primary pages on page 26 and navigate to
page 9: factory .
2. Use the [

] and [

] keys to highlight versions and press
the [

] key to confirm your choice.
3. Use the [

] and [

] keys to highlight main or option
cards and press the [

] key twice to confirm your choice
and view the currently installed hardware and software
versions. Then, press the [

] key to return to the previous
screen.
4. Use the [

] and [

] keys to highlight site file and press
the [

] key to confirm your choice.
5. Use the [

] and [

] keys to highlight save, restore or
delete and press the [

] key to confirm your choice or
press the [] key to return to the previous screen.
6. Use the [

] and [

] keys to highlight yes or no about your
intention to save, restore, or delete the current site file.
Then, press the [

] key twice to confirm your selection
or press the [

] key to cancel and return to the previous
screen.
7. To turn the meter off and reboot it, use the [

] and [

]
keys to highlight power cycle meter and press the [

] key
to confirm your choice.
8. Use the [

] and [

] keys to highlight system info and
press the [

] key to confirm your choice.
9. Use the [

] and [

] keys to view the following pages:
system info, NVM status, SD card status, modbus status,
Panalink status , and option card status . After you have
finished viewing these pages, press the [

] key to return
to the previous screen.
10. Use the [

] and [

] keys to highlight tag and press the
[

] key to confirm your choice.
11. If desired, change the current meter tag (i.e., name), and
press the [

] key to confirm your selection or press the
[

] key to cancel and return to the previous screen.
74