Baker Hughes Panametrics Sentinel LCT8, User Manual

Page: 43 / 138

3.4.2 Composite programming
The composite program allows entry of configuration data that applies to the composite calculations. The composite
configurations are appropriately set for the intended application during commissioning. However, these settings should be
verified before data is acquired or whenever the meter reports an error.
NOTE: Composite programming is accomplished via the program primary page (see Figure 40 on page 26 ).
Figure 46: Fluid type/tracking configuration
Legend
Red At least user 1 level access required to follow the step.
Green At least user 3 level access required to follow the step.
Dotted
green
Not all transitional screens are shown (at least user 3 level
access required).
Green Option only visible to user 3 or above.
Use

or

arrow to highlight
the “tracking” option you want
to select and press  twice to
confirm selection.
Use

arrow to highlight
the “soundspeed max”
option and press  and
then adjust the value, if
not already highlighted.
NOTE: To select composite,
highlight the option and
press  key twice to
confirm the selection. Once
you confirm your selection
you will see the next
screen.
NOTE: Consult Panametrics factory before
choosing normal fluid type1 option or
preprogrammed (tracking ) options
33