Baker Hughes Panametrics Sentinel LCT8, User Manual

Page: 51 / 138

Setting the API condition - flow measurement at
To set the API base condition , refer to Figure 52 below and complete the steps on the next page.
NOTE: If necessary, refer to Table 4 on page 23 as a reminder about color code meanings.
Figure 52: API conditions - flow measurement at
Legend
Red At least user 1 level access required to follow the step.
Green At least user 3 level access required to follow the step.
Dotted
green
Not all transitional screens are shown (at least user 3 level
access required).
Green Option only visible to user 3 or above.
NOTE: To select composite, highlight the
option and press  key twice to confirm
the selection. Once you confirm your
selection you will see the next screen.
Use

or

arrow to highlight
the “API setup…“ if not already
highlighted..
Use

or

arrow to highlight
the “flow measure at…“ if not
already highlighted..
Use

or

arrow to highlight
the “pres(alt)“ and press  to
update value.
Use

arrow to highlight the
“pres(obs)“ or “dens(obs)”
and press  to update value.
Use

arrow to highlight
and press  twice to
confirm selection.
Use

or

arrow to highlight
the “API conditions…“ if not
already highlighted..
41