Copyright 2013 Baker Hughes Company.
English–DPI
620G Instruction Manual | 101
Scanning for Devices
1. Connect DPI
620 Genii to H1 bus. Refer to Section
2. Select the OPEN CONNECTION Icon on the Toolbar to enter device scan screen.
Figure
10
-
4: Device Scan Screen
3. Select the SCAN button.
The scanning progress dialog view will open. Any devices found in the selected range will
appear in the bus tree window list. All scanned devices are shown as a bold icon with an
associated tag. Previous scan results are indicated in gray.
Figure
10
-
5: Device Scan View
Note:
The scan may be stopped at any time by selecting the CANCEL button. If canceled
the current scan results are retained.
A search term can be entered into the SEARCH dialog to look for a specific device in the
discovered scan list.
4. Selecting any device in the search results and selecting OK will initiate connection to the
‘Device Focus view’.