Copyright 2013 Baker Hughes Company.
English–DPI
620G Instruction Manual | 7
Instrument Return
1.16 Instrument Return
1.16.1 Return Goods/Material Procedure
If the unit requires calibration or is unserviceable, return it to the nearest Druck Service Centre
https://qrco.de/bcPHml
.
Contact the Service Department to obtain a Return Goods/Material Authorization (RGA or RMA).
Provide the following information for a RGA or RMA:
•
Product (e.g. DPI
620G)
•
Serial number.
•
Details of defect/work to be undertaken.
•
Calibration traceability requirements.
•
Operating conditions.
1.16.2 Safety Precautions
Provide information if the product has been in contact with any hazardous or toxic substances
and, the relevant MSDS and or COSHH references and precautions to be taken when handling.
1.16.3 Important Notice
Do not use unauthorized sources to service this equipment as this will affect the warranty and
may not guarantee further performance.
When discarding used equipment and batteries, obey all the local health and safety procedures.
1.16.4 For More Information Contact
Druck customer service department:
1.17 Packaging for Storage or Transportation
To store the unit or to return the unit for calibration or repair carry out the following procedures:
1. Pack the Instrument.
2. To return the instrument for calibration or repair, complete the return goods procedure. See
3. Return the instrument to the manufacturer or an approved service agent for all repairs.
1.18 Environment
The following conditions apply for both shipping and storage:
•
Temperature Range
-
20°C to +70°C (
-
40°F to +158°F)
•
Altitude up to 15,000 feet (4,570 meters).
