Copyright 2013 Baker Hughes Company.
46 | DPI
620G Instruction Manual–English
Chapter
4.
Electrical Tasks
Figure
4
-
14: PT100 RTD Measure CH1 2-Wire (Range
-
200 to 850°C)
1. Set the applicable channel options.
2. Complete the electrical connections.
3. If necessary, change the RTD Type (default is PT100).
4. SETTINGS
> RTD TYPE
The MEASURE OHMS MODE can also be selected as Standard or True Ohms.
Note:
To measure or simulate resistance Ω, select the Resistance function (Range 0 to 4000
Ω).
A custom RTD setting may be used by selecting the CUSTOM RTD tick box and configured by
importing the relevant custom RTD file.
Figure
4
-
15: PT100 RTD Source CH1 4-Wire (Range
-
200 to 850°C)
