62
62
Fence Scale Calibration
The fence scale indicator windows can be calibrated with the fence scale by loosening the two
mounting screws (A) and sliding it in the desired direction.
1. Position and lock the fence at 13", as indicated by
the scale, then cut your scrap piece of wood.
2. Reposition and lock the fence at 12", as indicated by
the scale.
3. Flip your scrap piece of wood over, placing the side
that was cut in Step 2 against the fence, and then
make your cut.
4. Measure the width of the freshly cut workpiece with
a tape measure. The workpiece width should be
exactly 12". If it is not, then adjust the indicator
window to match the width of the workpiece.
A
Summary of Contents for TS-1248P
