18
18
ASSEMBLY AND SET UP
1. Fasten the front rail onto the main table with (4)
M8-1.25 x 25 flat head screws (A).
2. Secure the left side of the front rail to the pre-
installed extension wing with (1) M8-1.25 x 25 flat
head screw, 8mm lock washer, and M8-1.25 hex
nut (B).
3. Fasten the rear rail to the table with (4) M8-1.25 x
25 cap screws, 8mm lock washers, and 8mm flat
washers (C).
4. Fasten the right end of the rail to the pre-installed
extension wing with (1) M8-1.25 x 25 cap screw,
(2) 8mm lock washers, (1) 8mm flat washer, and
(1) M8-1.25 hex nut (D).
WARNING:
For your own safety, DO NOT connect the machine to the
power source until the machine is completely assembled and you read and
understand the entire instruction manual.
A
B
C
D
Summary of Contents for TS-1248P
