Baileigh TS-1248P, Operator'S Manual

Page: 70 / 104

66
66
mm/inch FUNCTION
The mm/inch button will change the display to measure in either millimeters or inches, or it will
function as a navigation button when on a menu function screen.
Press the mm/inch button when the operating screen is active to change between millimeters or
inches. This change is instant and does not require re-calibration.
ABS/REL FUNCTION
The ABS/REL button will change the display to show the ABS measurement or the
REL measurement when in the operating screen, or it will function as a navigation button when
on a menu function screen.
Press the ABS/REL button to change between the two setting. ABS or REL will display on the
upper right corner of the display to indicate which screen is active.
The ABS measurement is considered a hard reset and requires being in the menu function to
reset the zero position. See
Menu Function “orG” to zero this measurement.
The REL measurement is considered a soft reset and may be reset at any time the REL screen
is active by pressing the Zero/Enter button.
MENU FUCTIONS
Press the Menu/Return button to display the Menu functions. Pressing the
Menu/Return button at any time will return the screen to the operating screen.
Once in the Menu function, press either the left or right arrow buttons to move to the 5 different
menu functions.
Menu Function “orG”
The “orG” function is used to zero and calibrate the ABS measurement setting. This setting will
display the measurement from the zero point as long as the fence remains on the table and in
contact with the magnetic strip. It must be reset when the fence has been removed from the
table.
1. Press the Menu/Return button.
2.
Press arrow button to move to “orG” screen.