21
21
8. Fasten the support legs (E) to the main extension
table with (8) M6-1 x 12 Phillips head screws and
6mm flat washers (F).
9. Adjust both feet until they touch the ground with
firm pressure without lifting the extension table, and
tighten the hex nuts against the legs to secure the
feet.
10. Fasten the shelf end plate to the legs with (4) M6-1
x 12 Phillips head screws and 6mm flat washers
(G).
11. Place the shelf brackets with the angle inward to
retain the shelf, between the cabinet and shelf end
plate, and fasten with (4) M6-1 x 12 hex bolts, (4)
6mm flat washers and (2) M6-1 hex nuts (H).
Note: The flange on the shelf bracket
must point up to ensure proper installation.
12. Place the lower shelf in the brackets (I).
E
F
H
G
I
Summary of Contents for TS-1248P
