Setting Up - IBM Mainframe (zSeries)
54
AXIS 5570e User’s Manual
PRTnnnn Statement:
A
PRTnnnn
statement, which is required to define each printer
nnnn
statement FSA, is associated with an
FSS
statement. Each printer FSA
should have a unique
PRTnnnn
name that must match the label on the
CNTL
,
ENDCNTL
, and
PRINTDEV
statements for the PSF startup procedure
specified in the
PROC
parameter.
Note:
The
PRTnnnn
parameters create JES2 default values that are used unless
other values are specified in the application program JCL. The
PRTnnnn
statement contains the following parameters:
FSS Statement
Explanation
FSS (fasname)
Specifies the unique 1- to 8-character name of a particular FSS. This name is
referenced in the
PRTnnnn
statement for each printer FSA that is associated
with this FSS. When you start the first printer that has an FSA definition for
that FSS, an FSS address space is created for PSF. PSF manages this FSS and the
printer FSA for the first printer. If you start a second printer with an FSA
definition for the same FSS, PSF manages a separate FSA for the second printer
in that FSS.
PROC
Specifies a procedure for starting the PSF FSS. The procedure, which must be
defined before that FSS is started, is a member of either SYS1.PROCLIB or a
library concatenated to SYS1.PROCLIB.
HASPFSSM
Specifies the 1- to 8-character name of the load module that is loaded into the
PSF FSS address space. This load module contains the various FSI service
routines that JES2 supplies. For PSF, specify the default value
(
HASPFSSM=HASPFSSM
).
The label on the
PRINTDEV
statement must be 8 characters or fewer. PSF
accepts the
PRTnnnn
,
PRINTnn
,
and
PRINTERn
formats.
PRTnnnn
is the recommended format.
PRTnnnn
Statement
Explanation
CKPTPAGE
Specifies the number of pages between data-set checkpoints. If checkpoint
intervals are too frequent, printer performance is significantly reduced. If
intervals are too infrequent, and a PSF error occurs, the job has to be
reprocessed from the last checkpoint. In this case, printer performance is
significantly reduced if PSF errors continue to occur. The recommended
starting value is 100.
CLASS
Specifies the output classes processed by the printer. By defining print classes
you can handle disabled mechanisms.
FSS
Specifies the FSS for this device and must match the FSA name specified in
the corresponding FSS statement. This parameter is required.
MARK
Enables form markings to be placed on the job trailer pages. For the Axis
Network Print Server you should set this parameter to NO.
Note: This parameter is new in JES2 and replaces the MARK | NOMARK
parameter.
MODE
Specifies that the printer is managed by an FSS. This parameter is required.
