DBCS Support
AXIS 5570e User’s Manual
199
1. Make sure that the writer is stopped by typing
ENDWTR xxxxPRT01
on the AS/400 command line, where
xxxxPRT01
is the printer device
name. Press ENTER.
2. Type
VRYCFG CFGOBJ(xxxxPRT01) CFGTYPE(*DEV)
STATUS(*OFF)
to vary off the printer device, where
xxxxPRT01
is the
printer device name. Press ENTER.
3. Type
CHGDEVPRT xxxxPRT01
to change the printer device name, where
xxxxPRT01
is the printer device name. Press F4.
4. Under DBCS Feature (IGCFEAT) amend the Device Features and Last Code
Point to the appropriate value corresponding to the country language.
Device features and Last Code Point for Country options
5. Type
VRYCFG CFGOBJ(xxxxPRT01) CFGTYPE(*DEV)
STATUS(*ON)
on the AS/400 command line to vary on the printer device,
where
xxxxPRT01
is the printer device name. Press ENTER.
6. Type
STRPRTWTR xxxxPRT01
to start the Writer, where
xxxxPRT01
is the printer device name. Press ENTER.
7. Direct a printout to this printer device to confirm that the above changes
have been implemented correctly.
Extended IBM Printer Emulation
Extended emulation will only work in SBCS mode. Before entering
extended emulation you will have to change to single byte mode by
sending shift in.
Example (with DBCS mode before entering extended emulation)
Country
Device features
Last Code Point
Korea
2424K1
D3FE
Japan
2424J1
68FE
China
2424S1
6FFE
<SI>
(SCS Shift In Control Code)
%
SAVE;
%CONFIG-
<SO>
(SCS Shift Out Control Code)
