manualshive.com logo in svg

Axis 27980R1, User Manual

Share
Download
Axis 27980R1 User Manual Download Page 178

SNA Gateways

178

AXIS 5570e User’s Manual

3. Configure SNA Network ID. Either change the default value or let it stay on 

default.

4. Configure Data Link Adapters. The configuration is done on the Data Link 

Adapters Definitions screen by pressing insert for a new adapter config, then 
you always enter the Logical adapter name, Link type, Logical adapter 
number and Service status.

5. Configure PU and LUs. On the Configure PU Profile screen you can set 

default LU attributes, starting dependent LU address, number of dependent 
LUs, give CP a name, enable off-line test mode, status assignment of LUs 
activated by host, status call host at workstation attach, status PU profile 
start-up and logical adapter name. On the Configure Dependent LUs screen 
you can set VTAM LU name, lock for a session, LU type and model and 
preserve host session.

6. Assign LU Resources and Access Control Lists (ACLs). On the Configure 

Dedicated LUs you can dedicate a LU to a person or device or group of 
persons. This person(s) is described in the access control lists.

7. Configure Downstream PU. Choose Configure Downstream PUs and press 

insert. Give it a name and fill in starting LU address or leave at default, type 
in number of DownStream LUs and logical adapter name:

The CSCON adds new parameters according to the adapter type you have 

set. The resulting screen can look like this:

Concentrator gateway,

Microsoft

This is an outline of the procedure for configuring to a Microsoft SNA 

Server. More information is provided in the Support section of the Axis 

Web site at http://www.axis.com

1. Configure host connection.
2. Configure downstream connection.
3. Select host connection and assign one or more DownStream LUs to it.
4. Select downstream connection and associate the DownStream LUs (from 

step 3) with that connection.

5. If necessary, reorder the DownStream LU numbers, that is, the LU numbers 

used by the downstream system.

6. To connect multiple PUs (boxes) repeat steps 2-5.

Configure Downstream PU Connection

  Downstream PU name (CP name): 

_____________________________DPUname

  Starting downstream LU address: ___________________________2

  Number of downstream LUs: _________________________________1

  Logical adapter name: _____________________________________

Netware Comm Services Config V2.0 Wednesday 1999 September 4 

16.27

  Configure LUs for Downstream PUs _______________Downstream 

PU: AXIS5570e

  DLU __Address __PU Profile __LU Address __LU Type __Model 

__VTAM LU Name

  002 __(0x02) ____SAA_MAIN ____15 (0x0F) __Printer 

__________________ACP4 

Summary of Contents for 27980R1







































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands