Configuration Possibilities
166
AXIS 5570e User’s Manual
Enabling the SNMP3 Protocol
Invoke the print server’s Web interface to enable the SNMPv3 protocol.
1. Select
Admin | Network Settings | Detailed View | TCP/IP Network
and
ensure that
HTTPS Enabled
is set to
yes
to guarantee a secure
configuration.
Note: You must have a valid certificate loaded to be able to enable HTTPS.
See
“Enabling SSL via the Web Interface”
on page 163.
2. Select
Admin | Network Settings | Detailed View | SNMP
and set
SNMPv3
Enabled
to
yes
.
3. Create an
initial
user
by entering two new passwords: one authentication
password and one privacy password. Each password must consist of at least
8 characters.
4. Click the
Create initial user
button.
Now your print server is ready to accept communication according to the
SNMPv3 protocol. For further management you will need an SNMPv3
management application; you use this application to configure the print
server, to create new user accounts and to control access to it. Also see
“Accessing the Print Server’s Web pages over https://”
on page 164.
To Update the Initial
User
To update the initial user,
select
Admin | Network Settings | Detailed View
| SNMP
, enter the two passwords (one for authentication and one for privacy)
and click the
Update initial user
button.
