manualshive.com logo in svg

Axis 27980R1, User Manual

Share
Download
Axis 27980R1 User Manual Download Page 169

Upgrading the Firmware

AXIS 5570e User’s Manual

169

Section 13

 Upgrading the Firmware

Upgrading the Firmware

You can upgrade the AXIS 5570e firmware using one of the following 

methods:

•

AXIS ThinWizard (TCP/IP) 

•

From the print server’s internal Web pages (TCP/IP)

•

FTP (TCP/IP)

Note:

 

Upgrading from the

Print Server’s Internal

Web Pages

Follow these instructions to upgrade the firmware of your print server 

from its internal Web pages (flash loading over the Web):

1. Open your Web browser, enter the IP address of your print server and 

press 

Enter

. (See 

“Using a Web Browser for Print Server Management”

 on 

page 127 for detailed instructions on accessing your Axis print server on 
the Web).

2. From the 

Admin

 mode, click the 

Firmware Upgrade

 button. From here you 

can upgrade your print server with the latest available firmware.

Upgrading using

AXIS ThinWizard

AXIS ThinWizard 3.0 is a tool that enables batch upgrading of several 

print servers and can be used for upgrading the print server’s firmware in 

TCP/IP networks.

Follow the instructions below to upgrade your print servers using AXIS 

ThinWizard:

1. Log in to AXIS Thin Wizard.

2. Open the Network Group that contains the print server to be upgraded.

3. Click the 

Firmware

 button. The Firmware Wizard starts. 

4. Browse through the upgrading tips and click 

Next >

 when you are done. 

Select 

Latest Available Version

. Click 

Next >

. 

5. Select the servers you want to upgrade, by checking the correct upgrade 

boxes. Click 

Next >

. 

6. Enter the default User ID and Password of the servers you selected in the 

previous step. Select whether you want AXIS ThinWizard to verify the 
password immediately or when the upgrading job has started, by checking 
the appropriate box. Click 

Next >

. 

Updating instructions are supplied with the firmware release notes.

Summary of Contents for 27980R1







































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands