Setting Up - AS/400 (iSeries)
22
AXIS 5570e User’s Manual
Note:
Configuring for SNA printing in 5494 Mode is described in three separate
stages:
•
The AS/400 Host System Checklist
•
Configuring the Axis Network Print Server
•
Verifying the communication
The AS/400 Host
System Checklist
If you are using AS/400 Version 3 Release 1 or higher, the AS/400 host in
5494 CU mode is automatically configured. The instructions in this
section describe this automated configuration procedure.
If you are using a pre-version 3 release, you must perform the
configuration procedure manually. If this is the case, please refer to the
Axis Web site for further documentation.
Note:
1. Type
DSPNETA
on the AS/400 command line and press
Enter
. For future
reference, note the values of the
Local network ID
and
Default local
location
parameters. Press
F3
.
Example:
The required parameter values are highlighted in bold.
2. Type
WRKLIND *ELAN
and press
Enter:
to get a list of all line descriptions on the system. Type
5
in front of the line
description and press
Enter.
SNA is only available for print server models with the SNA option installed. Please refer to
Protocols and Datastreams
, on page 9.
You will find an AS/400 Parameter checklist in the AXIS 5570e User’s Guide where you can
enter the values described in this section for future reference.
DSPNETA
Display Network Attributes
System: S1032BB0
Current system name . . . . . . . . . . . . . . : S1032BB0
Pending system name . . . . . . . . . . . . . . :
Local network ID . . . . . . . . . . . . . . . . : > APPN
Local control point name . . . . . . . . . . . . : S1032BB0
Default local location . . . . . . . . . . . . . : > S1032BB0
Default mode . . . . . . . . . . . . . . . . . . : BLANK
APPN node type . . . . . . . . . . . . . . . . . : *ENDNODE
Data compression . . . . . . . . . . . . . . . . : *NONE
Intermediate data compression . . . . . . . . . : *NONE
Maximum number of intermediate sessions . . . . : 200
Route addition resistance . . . . . . . . . . . : 128
Server network ID/control point name . . . . . . : *LCLNETID
*ANY
Press Enter to continue.
More...
F3=Exit
F12=Cancel
