Management and Configuration
AXIS 5570e User’s Manual
135
5. Save
the
config
file to the Axis Network Print Server by typing:
put config CONFIG
Notes:
The example on the next page describes how to upload and download the
config
file using FTP from a DOS window.
Example:
Viewing
the
Account
File
The
account
file contains data concerning the ten last print jobs. It
specifies an internal job number, the user that initiated the job, the
protocol and logical printer that was used, current status (Completed, Off-
line, or Printing), number of bytes printed, elapsed time and off- line
time.
Follow the instructions below to view the
account
file using FTP:
1. Log in to the Axis Network Print Server by typing:
ftp <host name>
or
ftp <IP address>
in a DOS windows (Windows
and OS/2) or in a UNIX shell.
2. Enter the user id and the password. (The default entries are
root
and
pass
.)
• It is important that the destination file is specified in capital letters. Otherwise the edits
are temporary and will be lost once the Axis Network Print Server has been powered off.
• To edit the
config
file from a Macintosh you will need FTP support such as MacTCP, Fetch
or Anarchie. The procedure for editing the file is the same as described above.
>
ftp npserver
connected to npserver.
220 AXIS 5570e FTP Network Print Server V7.10 Oct 04 2006
ready.
Name (npserver:root):
root
331 User name ok, need password
Password:
pass
(not visible)
230 User logged in
ftp>
get config
200 PORT command successful.
150 Opening data connection for CONFIG (192,168,0,10,4,5),
(mode ascii).
226 Transfer complete.
65066 bytes received in 0.52 seconds (1.2e+02 Kbytes/s)
ftp>
put config CONFIG
200 PORT command successful.
150 Opening data connection for CONFIG (192,168,0,10,4,5),
(mode ascii).
226 Transfer complete.
65066 bytes sent in 0.86 seconds (74 Kbytes/s)
ftp>
bye
221 Goodbye.
>
