Setting Up - IBM Mainframe (zSeries)
AXIS 5570e User’s Manual
47
21. Set Default LU type to
Printer (LU type 1 or 3)
.
22. Specify the VTAM LU name prefix. Click OK.
Notes:
You can now generate a configuration report from NW for SAA. To do
this, simply mark the server icon in the left window and select
Generate Server Configuration Report
from the function
menu.
The following table is a summary of a report generated by this command
for the example above.
• When the LUs are created the default names for the Printer Devices will be <name prefix>
followed by a two digit number starting at the number you entered in the starting depen-
dent LU number field.
• In the example below, eight LUs are created automatically. The LU names created will be
BRLTST04 through to BRLTST0B. These names must correspond to the Printer Names you
specify for the TN3270E sessions in the Print Server.
Profile Name
NWSAA
SNA Network ID:
SEEDB
Peripheral node control point name:
CPNAME
Block ID/PU ID:
05D 66204
Local/Partner SAP for ILUs:
04
Logical Adapter:
E100B_1
PU Profile:
NWSAAPU
Adapter Name
E100B_1
Adapter Type:
LLC 802.2
Terminate peer link if no active APPC sessions:
No
Logical adapter number:
0
Number of local service access points:
2
Enable adapter at startup:
Yes
PU Profile Name
NWSAAPU
Number of dependent LUs:
8
Starting dependent LU number:
4
Peripheral node control point name:
NWSAAPU
Node ID (block/PU ID):
05D 66204
Offline test mode:
No
Assign only LUs activated by the host:
Yes
Enable SDDLU Support:
No
Adapter Name:
E100B_1
Adapter Type:
LLC 802.2
Maximum Session Count:
9
VTAM Name Prefix:
BRLTST
Default LU Type:
1
Default Model Number:
2
Default LU Category:
Public
Maximum frame size to transmit inbound:
0521
Remote node address:
020066800000
Remote Service Access Point:
04
Local Service Access Point:
04
Enable PU profile at startup:
Yes
