The Test Button
208
AXIS 5570e User’s Manual
Section 23
The Test Button
The test button is located on the front right hand side of the AXIS 5570e
and is used for:
•
Printing a test page to check the connection to the printer.
•
Printing a parameter list to see the print server’s current settings.
•
Performing a Factory Default of the print server.
If you want to change any of the parameters, use one of the methods
described in
“Management and Configuration”
on page 127.
Printing a Test Page
Press the test button
once
to print a test page. The Test Page contains
basic information about the AXIS 5570e. It is recommended that you
print a test page every time you have connected the print server to a
printer.
Printing the Server
Report & Parameter
List
Press the test button
twice
to print a server report and parameter list
showing the current AXIS 5570e settings.
Server Report
The Server Report includes the settings of the Axis Network Print Server,
information about your connected printers as well as the current network
settings.
Parameter List
This list provides comprehensive details of all the parameters and their
current status. Refer to
The Parameter List
, on page 216.
If you want to change any of the parameters, use one of the methods that
are described in
Management and Configuration
, on page 127.
Performing a Factory
Default
1. Remove the external power supply to switch off the print server.
2. Press and hold down the test button while you reconnect the external power
supply.
3. Continue to hold down the test button until the network indicator remains
constantly lit. This should take about 20 seconds.
4. Restart the print server by disconnecting and reconnecting the external
power supply
.
Important!
A Factory Default will reset all AXIS 5570e parameters and settings to their default values
except:
• Installed certificate
• Private key
